Filter
Top Products
23
Playing an MD
masterpage:L0-Rightfilename[\\Win-35\logitecmo\422958711MDSJE640CED\01GB03OPE-CED.fm]
Playing MDs
model name1[MDS-JE640] model name2[MDS-JE440]
[4-229-587-11(1)]
Playing MDs
This chapter explains the various ways
to play MDs.
Playing an MD
1
Turn on the amplifier and select MD on the
amplifier.
2
Press
?/1
to turn on the deck.
The STANDBY indicator turns off.
3
Insert an MD.
4
If necessary, turn AMS (or press
>
repeatedly) to
locate the track you want to start playing from.
If you want to play from the first track, skip this step
and go to step 5.
5
Press
H
.
The deck starts to play.
6
Adjust the volume on the amplifier.
Operations you may want to do during play
z
When you play an MD recorded in LP2 or LP4 Stereo
mode
The MD LP indicator lights up when you press
H
in step 5
above.
z
(MDS-JE640 only) To use headphones
Connect them to the PHONES jack. Turn LEVEL to adjust the
headphones level.
z
(MDS-JE640 only) You can adjust the analog signal
level output to the PHONES jack and the ANALOG OUT
jacks
1
While the deck is playing, press LEVEL/DISPLAY/CHAR (or
DISPLAY) repeatedly until the line output adjustment display
appears.
2
Turn AMS (or press LEVEL +/– repeatedly) to adjust the
output signal level.
To Press or turn
Stop play
x
Pause play
X
Resume play after pausing
H
or
X
Locate a succeeding track
AMS clockwise (or press
>
repeatedly)
Locate the beginning of the
current track or a preceding
track
AMS counterclockwise (or
press
.
repeatedly)
Eject the MD
A
after stopping play
AMS
H
AMS LEVEL
`/1