Filter
Top Products
21
masterpage:Rightfilename[\\Win-35\logitecmo\422958711MDSJE640CED\01GB03OPE-CED.fm]
Synchro-recording with a Sony CD player
Recording to MDs
model name1[MDS-JE640] model name2[MDS-JE440]
[4-229-587-11(1)]
Synchro-recording with
a Sony CD player
(CD Synchro-recording)
When the deck is connected to a Sony CD player or Hi-Fi
component system, you can easily copy the contents of
CDs to the MD using the deck’s remote. Because the MD
remote operates both the MD deck and the CD player or
CD player section of the component system, make sure to
place the MD deck and the CD player as close together as
possible.
1
Turn on the amplifier and the CD player, and select
CD on the amplifier.
2
Do steps 2 to 5 of “Recording to an MD” on
page 13.
3
Insert a CD into the CD player and select the
playing mode (Shuffle Play, Program Play, etc.) on
the CD player.
4
Press CD-SYNCRO STANDBY.
The CD player changes to play standby and the MD
deck changes to recording standby.
5
Press CD-SYNCRO START.
The deck starts recording and the CD player starts to
play.
The track number and elapsed recording time of the
track appear in the display.
If the CD player does not start playing
Some CD players may not respond when you press CD-
SYNCRO START. Press
X
on the CD player’s remote
instead to start play on the CD player.
Operations you may want to do during CD
Synchro-recording
z
You can use the remote of the CD player during CD
Synchro-recording
z
During CD Synchro-recording, track numbers are
marked in the following ways:
•
When the CD player is connected to the DIGITAL IN
connector, track numbers are automatically marked as they
appear on the CD.
•
When the CD player is connected to the ANALOG IN jacks,
track numbers are automatically marked when “T.Mark
Lsyn(c)” has been selected (page 19).
•
When you resume recording after recording pause, a new track
number is automatically marked, regardless of the track
marking parameter setting (“T.Mark Lsyn(c)” or “T.Mark
Off”).
z
You can change CDs during CD Synchro-recording
1
Press
x
on the CD player’s remote.
2
Change the CD.
3
Press
H
on the CD player’s remote.
Recording resumes.
z
You can also perform synchro-recording with a Sony
video CD player
By reprograming the MD’s remote, you can use the procedure
above to perform synchro-recording with a Sony video CD
player.
Press number button 2 while pressing down
?/1
on the MD
deck’s remote. You can now operate the MD deck and the video
CD player with the remote. To control the CD player again, press
number button 1 while pressing down
?/1
on the MD deck’s
remote.
z
During CD Synchro-recording, the deck copies CD
text information (CD text and disc memos) as it is to the
MD (Disc Memo Copy Function) (MDS-JE640 only)
The Disc Memo Copy Function operates when you make a CD
Synchro-recording from a Sony CD player connected with a
control A1
ΙΙ
cable (not supplied) to the MD deck.
Z
CD-SYNCRO STANDBY
CD PLAYER ./>
CD-SYNCRO START
CD-SYNCRO STOP
. >
m M
z x
X
H
Z
` / 1
>.
To Press
Stop recording CD-SYNCRO STOP
Pause recording CD-SYNCRO STANDBY
Locate the next track to be
recorded during recording
pause
CD PLAYER
.
/
>
Resume recording after
pausing
CD-SYNCRO START
Check the remaining
recordable time on the MD
TIME on the deck (MDS-
JE640) or DISPLAY (MDS-
JE440) (page 17)
Press To change the deck to
And change the CD
player to
H
Recording Play
x
Recording pause Stop
X
Recording pause Pause