Filter
Top Products
56
TUNER
Name Full
The system has stored the maximum
number of characters to be input.
CD
Name Full
There is no more space to store track or
disc titles.
OVER
You have reached the end of the CD while
pressing the MD/CD )+ button
during pause.
Troubleshooting (continued)
Specifications
Amplifier section
AUDIO POWER SPECIFICATIONS:
(U.S.A. and Canadian models only)
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
with 6 ohm loads both channels driven, from
70 - 20,000 Hz; rates 20 watts per channel minimum
RMS power, with no more than 0.9% total harmonic
distortion from 250 milliwatts to rated output.
Continuous RMS power output
25 + 25 watts
(6 ohms at 1 kHz, 10%
THD, 120V)(Reference)
European model:
DIN power output (Rated)
25 + 25 watts
(6 ohms at 1 kHz, DIN,
230V)
Continuous RMS power output (Reference)
30 + 30 watts
(6 ohms at 1 kHz,
10% THD, 230V)
Music power output (Reference)
50 + 50 watts
Other models:
DIN power output (Rated)
20 + 20 watts
(6 ohms at 1 kHz, DIN,
240V)
18 + 18 watts
(6 ohms at 1 kHz, DIN,
220V)
Continuous RMS power output (Reference)
25 + 25 watts
(6 ohms at 1 kHz,
10% THD, 240V)
23 + 23 watts
(6 ohms at 1 kHz,
10% THD, 220V)
Peak music power output 400 watts
Inputs TAPE IN (phono jacks):
voltage 250 mV/125 mV,
impedance 47 kilohms
Outputs TAPE OUT (phono jacks):
voltage 250 mV
impedance 1 kilohms
PHONES (Stereo minijack):
accepts headphones of 8
ohms or more.
SPEAKER: accepts impedance of 6 to
16 ohms.