Filter
Top Products
23
The CD Player
2 Press EDIT and press +/–
repeatedly until “Name in ?”
appears.
3 Press ENTER/YES.
The cursor flashes.
4 Press CHARACTER repeatedly
until the type of character you want
appears.
Each time you press the button, the
display changes as follows:
A (Upper case) n a (Lower case) n 0
(Numbers) n ! (Symbols)*
n (Space)** n A…
* You can use the following symbols.
** To enter a space
Go to the step 6. You cannot label a
blank space for the first letter.
5 Press +/– repeatedly until the
desired character appears.
6 Press CURSOR /.
The character you selected in step 5 stops
flashing and the cursor shifts to the right.
LEVEL SYNC
-
DISC
DBFB
CD
imn?Nea
Cursor
LEVEL SYNC
-
DISC
DBFB
CD
7 Repeat steps 4 through 6 to
complete the entire title.
If you enter an incorrect character,
press CURSOR ? or / until the
character you want to change flashes,
then repeat steps 4 through 6.
To erase a character, press
CANCEL/NO while the character is
flashing. You cannot insert characters
between previously inserted characters.
8 Press ENTER/YES to complete the
labelling procedure.
The title is memorized into the unit and
then the original display appears.
To cancel labelling
Press EDIT.
Note
Turn on the system power at least once a month,
otherwise the titles are erased from the memory.
To check the titles
Press DISPLAY while playback is stopped.
Each time you press the button, the display
changes as follows:
The disc title
The total number of tracks and the total
playing time
To erase a disc title
1 Press EDIT then press +/– repeatedly until
“Name Erase ?” appears.
2 Press ENTER/YES.
The disc title flashes.
“No Name” appears if no disc title is
stored.
3 Press +/– repeatedly until the disc title you
want to erase disappears.
4 Press ENTER/YES again.
“Complete” appears and the disc title is
erased.
To cancel erasing
Press CANCEL/NO.
˜
!"#$%&'()∗+,–./:;<=>?@_`
Cursor
LEVEL SYNC
-
DISC
DBFB
A
CD