18
Recording from the radio
(continued)
While “TOC” is lit or is flashing
To ensure complete recording, do not move
the deck or disconnect the mains lead. The
deck updates the Table of Contents (TOC)
while “TOC” is flashing.
Notes
• The MD recording is complete only after all the
recording information is entered to TOC at which
point TOC stops flashing and goes out. Be careful
not to disconnect the mains lead or move the deck
before this point. Before disconnecting the mains
lead, do the following:
– Remove the MD.
– Press
, to turn off the system.
• If the MD is record protected, “MD Protected”
appears in the display and the MD cannot be
recorded on.
Press MD 6 and remove the MD, slide the record
protection tab to the closed position (see page 28),
insert the MD and try again.
The CD Player
Playing the CD
tracks repeatedly
–– Repeat Play
You can repeat a CD in normal play, Shuffle
Play and Programme Play.
REPEAT
Press REPEAT during play until
“REPEAT” or “REPEAT 1” appears.
REPEAT: For all the tracks on the current CD.
REPEAT 1* : For a single track only.
* You cannot repeat only one track during Shuffle
Play and Programme Play.
To cancel Repeat Play
Press REPEAT until “REPEAT” or “REPEAT
1” disappears.
LEVEL SYNC
-
TRACK REPEAT
DBFB
CD
1DC235sm