Filter
Top Products
97
Settings and Adjustments
◆Line3 Input
Selects a method of inputting video signals for the
LINE 3/DECODER jack. The picture will not be
clear if this setting does not match the type of
video input signal.
◆Line3 Output
Selects a method of outputting video signals for
the LINE 3/DECODER jack.
Line4 Input
Selects a method of inputting video signals for the
LINE 4 IN jack on the rear panel of the recorder.
Audio Settings (Audio)
The “Audio” setup allows you to adjust the sound
according to the playback conditions.
1 Press SYSTEM MENU while the recorder is
in stop mode.
2 Select “SETUP,” and press ENTER.
3 Select “Audio,” and press ENTER.
The “Audio” setup appears with the following
options. The default setting is underlined.
Audio DRC (Dynamic Range Control) (DVDs
only)
Makes the sound clear when the volume is turned
down when playing a DVD that conforms to
“Audio DRC.”
Note
The Audio DRC function works for Dolby Digital
sources only.
Video/
RGB
Inputs video signals or RGB
signals.
Decoder Select this when connecting to a
PAY-TV/Canal Plus decoder.
S Video Inputs S-video signals.
Video
Outputs video signals.
S Video Outputs S-video signals.
Video
Inputs video signals.
S Video Inputs S-video signals.
Off No compression of dynamic
range.
Standard Reproduces the soundtrack with
the dynamic range intended by the
recording engineer.
Max Maximum compression of
dynamic range.
SETUP
Settings
Features
Audio
Video
Easy Setup
Options
Speaker
Audio DRC :
CD Priority :
Standard
Auto
,continued