Filter
Top Products
100
Synchro Rec
Selects the recording destination used for
Synchro-Recording (page 57).
HQ Setting (HDD only)
Selects the HQ mode used for recording on the
HDD (page 48).
Colour System
Selects the colour system when playing VIDEO
CDs (including Super VIDEO CDs).
Screen Saver
The screen saver image appears when you do not
use the recorder for more than 10 minutes while an
on-screen display, such as the System Menu, is
displayed on your TV screen. The screen saver
image helps prevent your display device from
becoming damaged (ghosting).
Speaker Settings (Speaker)
The “Speaker” setup allows you to adjust the
speaker system (speaker positions, loudness, etc.).
Note
Check that the subwoofer is turned on, and that the
system cord is connected securely.
1 Press SYSTEM MENU while the recorder is
in stop mode.
2 Select “SETUP,” and press ENTER.
3 Select “Speaker,” and press ENTER.
The “Speaker” setup appears.
4 Select an item.
“Size”: Selects the surround speaker position,
etc. (page 101).
“Distance”: Sets the speaker distance from the
listening position (page 101).
“Level”: Sets the speaker level (page 102).
“Test Tone”: Emits the test tone for adjusting
the individual speaker levels (page 102).
5 Press ENTER.
Options for the selected item appear (see
below). The default settings are underlined.
6 Select an option, and press ENTER.
Record to
HDD
Records to the HDD.
Record to
DVD
Records to DVDs.
HQ+ Records in higher quality
(approximate 15 Mbps).
HQ Records in the standard HQ mode.
PAL
Plays a disc in PAL colour system.
NTSC Plays a disc in NTSC colour
system.
On
Turns on the screen saver function.
Off Turns off the function.
SETUP
Settings
Easy Setup
Speaker
Features
Options
Audio
Video
Test Tone:
Level
Distance
Off
Size