Filter
Top Products
68
Additional Information
The remote does not function.
, Make sure you select the correct function on the
remote.
, Pressing the TV CONTROL button sets the remote
to operate the TV only. The ?/1 switch does not
turns on/ off the system. If this mode is on, press a
function button on the remote before operating the
system or another component.
, Remove any obstacles between the remote and the
system.
, Use the remote near the system.
, Point the remote at the remote sensor
g
on the
system.
, Replace all the batteries in the remote with new
ones if they are weak.
The disc does not play.
, There is no disc inside (“Insert disc.” appears on
the TV screen).
Insert a disc.
, Insert the disc correctly with the playback side
facing down on the disc tray.
, Clean the disc.
, The system cannot play CD-ROMs, etc. (page 5).
Insert a DVD, a VIDEO CD, or a CD.
, Check the region code of the DVD (page 4).
, Moisture has condensed inside the system.
Remove the disc and leave the system turned on
for about half an hour (page 6).
The system does not play from the beginning
when playing a disc.
, Repeat Play, Shuffle Play or Program Play has been
selected. Press CLEAR on the remote.
, Resume Play has been selected.
Press s on the front panel or x on the remote
before you start playing (page 29).
, A title menu or a DVD menu automatically
appears on the TV screen when you play your
DVD, or a setup display automatically appears on
the TV screen when you play your VIDEO CD
with PBC functions.
The system starts playing the DVD automatically.
, The DVD features the auto playback function.
Playback stops automatically.
, Depending on the disc, the auto pause signal is
recorded. While playing such a disc, the system
stops playback at the signal.
Cannot stop playback, Search, Slow-motion Play,
Repeat Play, Shuffle Play or Program Play, etc.
, Depending on the disc, you may not do some of
the operations above.
Messages do not appear on the TV screen in the
language you want.
, In the setup display, select the language for the on-
screen display in “OSD” under “LANGUAGE
SETUP” (page 52).
The language for the sound cannot be changed
when you play a DVD.
, Multilingual sound is not recorded on the DVD.
, Changing the language for the sound is prohibited
on the DVD.
The language for the subtitles cannot be changed
when you play a DVD.
, Multilingual subtitles are not recorded on the
DVD.
, Changing the language for the subtitles is
prohibited on the DVD.
The subtitles cannot be turned off when you play
a DVD.
, Depending on the DVD, you may not be able to
turn the subtitles off.
The angles cannot be changed when you play a
DVD.
, Multi-angles are not recorded on the DVD.
, Change the angles when “ANGLE” appears on the
front panel display (page 43).
, Changing the angles is prohibited on the DVD.
The system does not operate properly.
, Static electricity, etc., may affect the system’s
operation.
Disconnect the AC power cord once, then connect
it again.
Nothing is displayed on the front panel display.
, Press AMP MENU repeatedly on the remote to
display <<CUSTOMIZE>> on the front panel
display. Select “DISPLAY DIMMER,” then press
</, repeatedly to select anything but
“DISPLAY OFF.”
The numbers or letters of 5 characters are
displayed on the front panel display.
, Self-diagnosis function was activated. See the
table in page 69 and treat the system appropriately.
Troubleshooting