Filter
Top Products
Chapter 8 Menus
111
8-3 Extended Menu
Menu items in the 300s, relating to editing operations
Item number Item name Settings
301 VAR SPEED RANGE FOR
SYNCHRONIZATION
Select the playback speed range when carrying out playback in variable
speed mode from a remote control unit connected to the REMOTE
connector.
–
2~+2: –2 to +2 times normal speed.
wide: –2.20 to +2.20 times normal speed.
308 SELECTION OF STD/NON-STD
FOR COMPOSITE VIDEO IN
Select the STD or NON-STD mode in accordance with a composite
video or S-video input.
STD (forced STD)
: The STD mode is always used (forced STD mode).
N-STD (forced non-STD): Use this setting when the input video signal is
unstable (forced NON-STD mode).
Note
When using a VCR with no built-in time base corrector (e.g. a home-use
VHS-system VCR), select N-STD.
310 REC INHIBIT Select whether recording is inhibited.
off
: Do not inhibit recording.
on: Inhibit recording.
311 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH1
Select methods for setting the edit presets of the digital audio channels
CH1 to CH4 of this unit. Make these settings when using an editor (PVE-
500, BVE-600, etc.) or remote control unit without a function to control
digital audio edit presets.
The edit presets of the digital audio channels of this unit are turned on
and off according to the specified analog audio presets of the editor or
remote control unit.
nodef (no definition): No definition
ch 1 (analog ch1): Follow the edit preset of analog channel 1.
ch 2 (analog ch2): Follow the edit preset of analog channel 2.
ch1+2 (analog ch1+ch2): Follow the edit preset of analog channel 1 or
2.
(The default settings for each item are as follows)
311: ch 1 (analog ch1)
312: ch 2 (analog ch2)
313: nodef (no definition)
314: nodef (no definition)
312 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH2
313 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH3
314 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH4
317 AUDIO EDIT MODE Select the type of transition for audio editing.
cut (cut edit): Cut editing (Audio is discontinuous at edit points, and
noise may occur during playback.)
cross (cross fade)
: Cross-fade (Processing time 10ms)
320 DIGITAL AUDIO PB PROCESS ON
EDIT POINT
Select the treatment of audio playback at edit points.
cut: Carry out a cut (possibly resulting in audio discontinuities at the edit
point).
fade
: Fade out and fade in.
329 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH5
Select methods for setting the edit presets of the digital audio channels
CH5 to CH8 of this unit. Make these settings when using an editor (PVE-
500, BVE-600, etc.) or remote control unit without a function to control
digital audio edit presets.
The edit presets of the digital audio channels of this unit are turned on
and off according to the specified analog audio presets of the editor or
remote control unit.
nodef (no definition):
No definition
ch 1 (analog ch1): Follow the edit preset of analog channel 1.
ch 2 (analog ch2): Follow the edit preset of analog channel 2.
ch1+2 (analog ch1+ch2): Follow the edit preset of analog channel 1 or
2.
330 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH6
331 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH7
332 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH8