Filter
Top Products
24
MZ-B10
• Adjustment Method of VREC_MIDDLE (X4 speed)
(item number: 752)
1. Connect a digital voltmeter to the TP1620 (VREC) on the
MAIN board, and adjust [SPEED CONTROL+] key (voltage
up) or [SPEED CONTROL --] key (voltage down) so that the
voltage becomes 1.10 ± 0.01V.
2. Press the X key on the set or the key on the remote
commander to write the adjusted value.
Adjustment and Connection Location:MAIN board
(see page 25)
• Adjustment Method of VREC_HIGH (HEAD MOTOR)
(item number: 753)
1. Connect a digital voltmeter to the TP1620 (VREC) on the
MAIN board, and adjust
[SPEED CONTROL +] key (voltage
up) or [SPEED CONTROL --] key (voltage down) so that the
voltage becomes 1.65 ± 0.01V.
2. Press the X key on the set or the key on the remote
commander to write the adjusted value.
Adjustment and Connection Location:MAIN board
(see page 25)
VREC M **
752
Set LCD display
**
: Adjusted value
digital
voltmete
r
TP1620 (VREC)
TP1616 (GND)
MAIN board
VREC H **
753
Set LCD display
**
: Adjusted value
digital
voltmete
r
TP1620 (VREC)
TP1616 (GND)
MAIN board