Filter
Top Products
8
GB
Hooking up the system (continued)
6 Set the color system according to your
TV while the power is off.
* When your TV automatically changes the color
system according to the input signal.
Notes
• When you play a VIDEO CD recorded in the
different color system from the one you set to the
unit, the picture image may be distorted.
• You cannot set the color system in the Power
Saving Mode.
When carrying this system
Perform the following procedure to protect
the CD mechanism.
1 Make sure that all discs are removed
from the system.
2 Press FUNCTION repeatedly until “CD”
appears.
3 Press FUNCTION while holding down
DISC 1 until “LOCK” appears.
4 Unplug the power cord.
The color system
of your TV
PAL
AUTO*
NTSC
Do this
While holding down
DISC 1 Z, press ?/1.
While holding down
DISC 2 Z, press ?/1.
While holding down
DISC 3 Z, press ?/1.
3 Connect the video input jack of your TV
to the VIDEO OUT jack with the
supplied video cable.
When using a TV
Turn on the TV and select the video input so
that you can view the pictures from this system.
4 For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
VOLTAGE SELECTOR
230-
240V
220V
120V
5 Connect the power cord to a wall outlet.
The demonstration appears in the display.
If the plug of the power cord does not fit
your wall outlet, attach the supplied adapter
on to the plug (for models with a plug
adapter). To turn on the system, press ?/1.