Filter
Top Products
12
GB
Playing a VIDEO CD (continued)
To enter a track number using the
remote
You can also select the desired track (or scene
for a VIDEO CD with PBC functions) using
the remote during Normal Play.
Press the numeric buttons. The playback
automatically starts.
To enter a track number over 10
1 Press >10.
2 Enter the corresponding digits.
To enter 0, press 10/0 instead.
Example:
To enter track number 30, press >10, then 3 and 10/0.
To Do this
Play repeatedly
(Repeat Play)
Press REPEAT/FM MODE (or
REPEAT on the remote) during
play until “REPEAT” or
“REPEAT 1” appears.
REPEAT*
3
: For all the tracks on
the VIDEO CD up to five times.
REPEAT 1*
2
: For a single track
only.
To cancel playing repeatedly, press
REPEAT/FM MODE until
“REPEAT” or “REPEAT 1”
disappears.
Adjust the picture 1 Press PICTURE EFFECT on
the remote.
2 Adjust the picture using
R /r /T/t on the remote.
3 Press ENTER.
*
1
There may be some disturbance in the paused
video image.
*
2
Only when PBC function is set to off or when
playing VIDEO CDs without PBC function (Ver.
1.1)
*
3
You cannot select “REPEAT” and “ALL DISCS
SHUFFLE” at the same time.
Tips
• You can start playing from the desired track in
Normal Play. Slide the knob to l or to L (or
press . or > on the remote) until the desired
track number appears after step 3.
• The DISC 1 – 3 button indicator lights in orange
when a disc is loaded on the tray.
All of the DISC 1 – 3 button indicators light in
orange for the first time you turn on the system, and
then go out if the system determines that a disc is
not loaded after the disc tray is closed, etc.