Filter
Top Products
Optional Components
35
GB
Listening to audio from a
connected component
1 Connect the audio cords.
See “Hooking up optional components” on
page 34.
2 Press MD (VIDEO) to switch the
function to MD or VIDEO.
Start playing the connected component.
Notes
• Pressing FUNCTION and ?/1 while the power is
off automatically turns the power on and “VIDEO”
is selected as a function. When the system is in the
Power Saving Mode, this function does not work.
• If the sound is distorted or too loud when selecting
“VIDEO,” or you want to switch back to “MD,”
repeat the operation described above to switch to
“MD.”
Recording audio from a
connected component
1 Connect the audio cords.
See “Hooking up optional components” on
page 34.
2 Start recording manually.
See “Recording to a tape” on page 24.
Notes
• Pressing FUNCTION and ?/1 while the power is
off automatically turns the power on and “VIDEO”
is selected as a function. When the system is in the
Power Saving Mode, this function does not work.
• If the sound is distorted or too loud when selecting
“VIDEO,” or you want to switch back to “MD,”
repeat the operation described above to switch to
“MD.”