Filter
Top Products
10
GB
Setting the clock
1 Turn on the system.
2 Press CLOCK/TIMER SET on the
remote.
3 Press R or r on the remote to set the
hour.
4 Press ENTER.
5 Press R or r on the remote to set the
minute.
6 Press ENTER.
The clock starts working.
If you make a mistake
Press T or t on the remote repeatedly until
the incorrect item flashes, then set it again.
To adjust the clock
1 Press CLOCK/TIMER SET on the remote.
2 Press R or r on the remote to select
“CLOCK SET?”, then press ENTER.
3 Do the same procedures as step 3 to 6
above.
Note
You cannot set the clock in the Power Saving Mode.
VIDEO CD/CD/MP3 Files
When you play
a CD single (8
cm CD), place
it on the inner
circle of the
tray.
Loading a disc
1 Press DISC 1 – 3 Z.
The disc tray opens.
2 Place a disc with the label side up on
the disc tray.
To load other discs, press a different Z and
place the disc in the disc tray.
3 Press the same Z again to close the
disc tray.
Playing a VIDEO CD
––Normal Play/Shuffle Play/Repeat
Play
You can play both VIDEO CDs without PBC
functions (Ver. 1.1) and VIDEO CDs with PBC
functions (Ver. 2.0).
This system lets you play the VIDEO CD in
different play modes.
Playing time
Disc tray number Track number
1 Turn on your TV and select the
video input.
Refer to the instructions included
with your TV for details.
2 Press FUNCTION repeatedly to
switch the function to CD.