Filter
Top Products
6
1 Press CLOCK/TIMER SET.
The hour indication flashes.
2 Turn the jog dial to set the hour.
The clock is on a 12-hour system.
3 Press ENTER/NEXT.
The minute indication flashes.
4 Turn the jog dial to set the minute.
5 Press ENTER/NEXT.
The clock starts working.
Tips
• If you’ve made a mistake, start over from step 1.
• Setting the time deactivates the demo mode.
If you want to display the demo mode, press
DISPLAY/DEMO when the power is off.
Note
The previous explanation shows you how to set the
time while the power is off. To change the time
while the power is on, do the following:
1 Press CLOCK/TIMER SET.
2 Turn the jog dial to select SET CLOCK.
3 Press ENTER/NEXT.
4 Perform steps 2 through 5 above.
When carrying this system
Do the following to protect the CD
mechanism.
1 Press FUNCTION repeatedly until “CD”
appears in the display.
2 Hold down LOOP and press 1/u (power)
so that “LOCK” appears in the display.
To attach the front speaker pads
Attach the supplied front speaker pads to the
bottom of the speakers to stabilize the
speakers and prevent them from slipping.
Step 1: Hooking up the system
(continued)
Step 2: Setting the
time
You must set the time before using the timer
functions.
ß
RELAY
RELAY
DAILY 1 2 REC SLEEP
DAILY 1 2 REC SLEEP
DOLBY NR
DOLBY NR
PROGRAM
PROGRAM
REPEAT1
REPEAT1
SHUFFLE
SHUFFLE
TUNED
TUNED
MONO
MONO
STEREO
STEREO
SYNC
SYNC
STEP
STEP
MHz
MHz
kHz
kHz
REC
REC
t
VOLUME
VOLUME
a
DBFB
DBFB
SUR
SUR
1 2,4 3,5
DSP
CD
ß
RELAY
RELAY
DAILY 1 2 REC SLEEP
DAILY 1 2 REC SLEEP
DOLBY NR
DOLBY NR
PROGRAM
PROGRAM
REPEAT1
REPEAT1
SHUFFLE
SHUFFLE
TUNED
TUNED
MONO
MONO
STEREO
STEREO
SYNC
SYNC
STEP
STEP
MHz
MHz
kHz
kHz
REC
REC
t
VOLUME
VOLUME
a
DBFB
DBFB
SUR
SUR