Filter
Top Products
23
Recording on a tape
manually
5 Press P PAUSE on deck B.
Recording starts.
6 Start playing the source to be
recorded.
To Press
Stop recording π on the deck B
Pause recording P PAUSE on the deck B
Tips
• If you want to record from the reverse side, press
ª so that ª (for reverse side) lights up.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that “DOLBY NR” appears after pressing r REC.
• When recording from a CD, you can use the jog
dial to select tracks during recording pause mode
(after pressing r REC on step 3 and before
pressing P PAUSE in step 5).
Note
Dolby NR and DIRECTION MODE (ß or RELAY)
is off when the mains AC power supply is switched
off.
The Tape Deck
You can record from CD, tape, or radio as
you like. For example, you can record just the
songs you want or record from the middle of
the tape. The recording level is adjusted
automatically.
1 Insert a blank tape into deck B.
2 Press FUNCTION repeatedly until
the source you want to record (e.g.,
CD) appears.
3 Press r REC.
Deck B stands by for recording. · (for
front side) lights up.
4 Press DIRECTION MODE
repeatedly to select A to record on
one side. Select ß (or RELAY) to
record on both sides.
DOLBY NR
543
216
1
DSP
CD
1/u
(power)