Filter
Top Products
29
Adjusting the audio
emphasis
Activating the surround
effect
You can enjoy the surround effect.
/ Press DSP - DELAYor REVERB to
activate the delay or reverb effects.
“DELAY” or “REVERB” appear in
the display.
To adjust the surround level
Press OPEN/CLOSE or place your hand to
the sliding sensor to slide the panel. Press
SURROUND +/– to adjust level. The Delay
level and the reverb level are adjusted at the
same time.
Note
When you choose other sound effects, the surround
effects will be canceled. If you want to memorize the
effect, store it into a personal file (see “Making a
personal audio emphasis file”).
REVERB
DELAY
DSP
CD
1/u
(power)
You can adjust the audio emphasis using the
graphic equalizer and surround effect.
Adjusting the graphic
equalizer
You can adjust the sound by raising or
lowering the levels of specific frequency
ranges.
Before operation, first select the audio
emphasis you want for your basic sound.
1 Select the audio emphasis you want
for your basic sound (see “Selecting
the audio emphasis”).
2 Press OPEN/CLOSE or place your
hand to the sliding sensor to slide
the panel.
3 Press EQ +/– button for the desired
frequency band to adjust level.
Note
If you choose another menu of audio emphasis
(other than “EFFECT OFF”), the adjusted sound
effect is lost. To retain the adjusted sound effect for
future use, store it in a personal file. (See “Making a
personal audio emphasis file”.)
3
2
EQ
1/u
(power)
ß
RELAY
DAILY 1 2 REC SLEEP
DAILY 1 2 REC SLEEP
DOLBY NR
DOLBY NR
PROGRAM
REPEAT1
REPEAT1
SHUFFLE
SHUFFLE
ALL
ALL
DISCS1
TUNED
TUNED
MONO
MONO
STEREO
STEREO
SYNC
SYNC
STEP
MHz
kHz
REC
REC
DBFB
SUR
t
VOLUME
1
SURROUND +/–
EQ