Filter
Top Products
Basic Operations
13
2 Press OPEN/CLOSE 6 and place a
CD.
Then press again to close the disc tray.
If the indicator for the tray you want to
record is not lit green, press DISC SKIP/
EX-CHANGE repeatedly so that it lights
green.
3 Press CD SYNCHRO.
Deck B stands by for recording and the
CD player stands by for playback. ·
(for front side) lights up.
4 Press DIRECTION MODE
repeatedly to select A to record on
one side. Select ß (or RELAY) to
record on both sides.
5 Press P PAUSE on deck B.
Recording starts.
To stop recording
Press π on deck B or p on the CD player.
Tips
• If you want to record from the reverse side, press
ª so that ª (for reverse side) lights up.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that “DOLBY NR” appears after pressing CD
SYNCHRO.
Notes
• You cannot listen to other sources while recording.
• Dolby NR and DIRECTION MODE (ß or
RELAY) is off when the mains AC power supply
is switched off.
Recording a CD
— CD Synchro Recording
The CD SYNCHRO button lets you record
from a CD to a tape easily. You can use TYPE
I (normal) or TYPE II (CrO2) tapes. The
recording level is adjusted automatically.
1 Press § and insert a blank tape into
deck B.
With the label
side up. When
you play a CD
single, place it on
the inner circle of
the tray.
ª
AUTO REVERSE
·
With the side
you want to
record facing
forward
DOLBY NR
DISC SKIP/
EX-CHANGE
1345
2