Filter
Top Products
18
Recording from a tape (continued)
3 Press DIRECTION MODE
repeatedly to select A to record on
one side. Select ß (or RELAY) to
record on both sides.
4 Press P PAUSE.
Dubbing starts.
To stop dubbing
Press π on deck A or B.
Tips
• When you dub on both sides, start recording from
the front side. If you record from the reverse side,
recording stops at the end of the reverse side.
• If you set DIRECTION MODE to ß when the
tapes you use have different lengths, the tape in
each deck reverses independently. If you select
RELAY, the tapes in both decks reverse together.
• You don’t have to set DOLBY NR, since the tape in
deck B is automatically recorded in the same state
as the tape in deck A.
Note
Dolby NR and DIRECTION MODE (ß or RELAY)
is off when the mains AC power supply is switched
off.