5
AM loop antenna
FM
75
Ω
AM
To activate the automatic sliding
panel
Press OPEN/CLOSE to slide the panel. Press
OPEN SENSOR ON/OFF, so that AUTO
indicator lights up. When you stand within
30 cm from the panel, the panel slides down
automatically.
continued
Extend the FM lead
antenna horizontally.
The panel closes automatically if you do not
operate on or in the panel for about 30
seconds.
Inserting two size AA (R6)
batteries into the remote
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
}
}
]
]
3 Connect the FM/AM antennas.
Set up the AM loop antenna, then connect it.
4 Set VOLTAGE SELECTOR to
position of your local power line
voltage.
5 Connect the power cord to a wall
outlet.
Demo mode appears in the display.
If the plug on this unit does not fit
your wall outlet, detach the supplied
adapter from the plug.
6 Deactivate the demo mode by
pressing DISPLAY/DEMO when
the system power is turned off.
The demo mode is also deactivated
when you set the time.
EQ
SLIDING SENSOR
OPEN/CLOSE
OPEN SENSOR ON/OFF
AUTO indicator