Filter
Top Products
26
Looping part of a CD
— Loop
DJ Effects
Flashing part of a CD
— Flash
With the loop function, you can repeat part of
a CD during playback. This lets you create
original recordings.
/ Press and hold LOOP (or LOOP on
the remote) during playback at the
point you want to start the Loop
function, and release to resume
normal play.
To adjust the loop length
Turn the jog dial while holding LOOP (or
press FILE SELECT V/v while holding LOOP
on the remote) to select different loop lengths
(LOOP 1~20).
With the flash function, you can “flash” the
CD sound during playback. This lets you
create original recordings.
/ Press and hold FLASH (or FLASH
on the remote) during playback at
the point you want to start the Flash
function, and release to resume
normal play.
To adjust the flash length
Turn the jog dial while holding FLASH (or
press FILE SELECT V/v while holding
FLASH on the remote) to select different flash
lengths (FLASH 1~20).
To use LOOP and FLASH together
Press and hold both LOOP and FLASH (or
LOOP and FLASH on the remote) at the same
time.
Notes
• The loop and flash length cannot be adjusted
during this operation. Adjust the loop and flash
lengths independently beforehand if necessary.
• To record the flash effect, use the analog MD/
VIDEO 1 OUT connections or this unit’s tape deck.
jog dial
LOOP
DSP
CD
1/u
(power)
jog dial
FLASH
DSP
CD
1/u
(power)