Filter
Top Products
58
EN
Labeling the preset
stations
— Station Name
4 3,5 1
26,8
DISPLAY
8 Turn REC LEVEL to adjust the
recording level.
See “Recording on a tape manually” on
page 52.
9 Turn MIC LEVEL to adjust the
microphone volume.
10
Select the track you want on the CD
and set the CD player to pause.
11
Press r REC on the tape deck.
The tape deck stands by for recording.
12
Press P or · on the tape deck.
Recording starts.
13
Press · ∏ on the CD player.
CD playback starts. Start singing along
with the music.
To stop recording
Press p on the tape deck and the CD player.
When you are done
Disconnect the microphone from MIX MIC
and press KARAOKE PON to turn off the
indicator.
Tips
•If you want to record your voice only through the
microphone, you can do so by selecting the CD
with the FUNCTION control and not playing a
CD.
•When you connect the microphone, the MD deck
performs analog recording (for DHC-MD77/
EX77MD/EX770MD).
You can put a name of up to eight characters
(Station Name) to a preset station. The
Station Name appears when you tune in the
station.
1 Press TUNER/BAND repeatedly
until the band you want appears.
European model:
FM n MW n LW*
Other models:
FM n AM
* You cannot assign a name to an LW station.
2 For European model:
Press TUNING MODE repeatedly
until “PRESET” appears.
For other models:
Press PRESET.
3 Turn MULTI CONTROLLER until
the preset number of the station you
want to label appears.
Singing along: Karaoke
(continued)