Filter
Top Products
15
EN
MODE SELECTOR
For MHC-EX66/EX660
You can make a digital recording onto the
connected MD deck from the system’s own
CD player. You can also make an analog
recording if you connect the MD deck using
audio cords.
• Connect an MD deck to DIGITAL OUT on
the CD player using an optical cable.
• Connect an MD deck to MD on the
amplifier using audio cords.
To listen to the sound of the MD
deck
Turn FUNCTION until the MD indicator
lights up.
To listen to the sound of the
connected component
Turn FUNCTION until the VIDEO 2 (DHC-
MD77) or VIDEO 2/AUX (DHC-EX77MD/
EX770MD) indicator lights up.
Tip
A built-in sampling rate converter automatically
converts the sampling frequency of various digital
sources to the 44.1 kHz sampling rate of the MD
deck. This lets you record sources such as 32- and
48-kHz DAT or satellite broadcasts, as well as CDs
and other MDs.
Notes
• If “Din Unlock” or “Cannot Copy” appears in the
display, you cannot make a digital recording. In
this case, record the sound source with MODE
SELECTOR set to ANALOG REC.
• When you make a digital recording using an
optical cable, you cannot adjust the recording
level.
• When audio cords are not connected to VIDEO2
(DHC-MD77) or VIDEO2/AUX (DHC-EX77MD/
EX770MD) on the amplifier, you cannot listen to
the digital component.
To the analog
(line) input of
an MD deck
To the analog
(line) output of
an MD deck
To the digital input of an MD deck
To the analog (line)
output of a digital
component
To the digital
output of a digital
component