Filter
Top Products
Basic Operations
25
EN
Do this
Press SYSTEM POWER.
Turn VOLUME (or press VOL
or on the remote).
3 Turn MULTI CONTROLLER to
tune in the desired preset station.
To
Turn off the
radio
Adjust the
volume
To listen to non-preset radio
stations
For European model:
Press TUNING MODE repeatedly until
“TUNING” appears in step 2, then turn
MULTI CONTROLLER to tune in the desired
station (Manual Tuning).
Press TUNING MODE repeatedly until
“AUTO TUNING” appears in step 2, then
turn MULTI CONTROLLER.
The frequency indication changes and
scanning stops when the system tunes in a
station (Automatic Tuning).
For other models:
Press MANUAL in step 2, then turn MULTI
CONTROLLER to tune in the desired station
(Manual Tuning).
Press AUTO in step 2, then turn MULTI
CONTROLLER.
The frequency indication changes and
scanning stops when the system tunes in a
station (Automatic Tuning).
Tips
•Pressing TUNER/BAND when the power is off
automatically turns the power on and tunes to the
last received station (One Touch Play).
•You can switch from another source to the tuner
just by pressing TUNER/BAND (Automatic
Source Selection).
•To improve broadcast reception, reorient the
supplied antennas.
•When an FM program is noisy, press ST/MONO
(European model) or STEREO/MONO (other
models) so that “MONO” appears. There will be
no stereo effect, but the reception will improve.
Press the button again to restore the stereo effect.
Frequency
Preset number
Turn counter-
clockwise
(or press
PRESET –
on the remote)
for lower preset
numbers.
Turn clockwise
(or press
PRESET + on
the remote)
for higher
preset
numbers.
– MULTI CONTROLLER +