Filter
Top Products
36
EN
The system automatically locates the last
recorded portion and starts recording from
that point. Also, you can record over the
previous recording just as you would using a
tape deck.
1 Insert a recordable MD.
2 Turn FUNCTION and select the
source (e.g., CD) you want to
record.
Recording on an MD
manually
3 Select the point at which you want
to start recording. To record on a
blank MD or record from the last
recorded portion, skip this step.
To record over:
• From a specific position of the track
Play the MD and press · ∏ at the
desired point. The system changes to
recording pause.
• From the beginning of the track
Turn SELECTOR until the desired
track number appears. If you want to
record over all the tracks, select the
track number 1 here.
4 Press r REC.
The deck stands by for recording. To
mark track numbers, see “Marking track
numbers” on page 43. When recording
from this system’s CD, the track
numbers are automatically marked.
5 Turn REC LEVEL to adjust the
analog recording level.
When you record the analog input signal
(when the ANALOG IN indicator lights
up), adjust the recording level. For
details, see “Adjusting the recording
level” on page 37.
6 Press · ∏ on the MD deck (or P
on the remote).
Recording starts.
7 Start playing the source to be
recorded.
r REC
=
SELECTOR
+
0)
p
· ∏
§
EJECT
•
•
•
•
•
•
•
•
•
0
10
§
OPEN/CLOSE
52
3,6
13
4
p