Sony HDX277WC Stereo System User Manual


 
• lfan error message appears, follow themessag<
then select [YES].
Anerror message appears when:
the headphones are connected to the unit or
surround amplifier.
the calibration mic is not connected.
front speakers are not conectly connected.
surround speakers arc not corrcct]y
connected.
front and surround speakers are not correctly
connected.
10 Press ÷/÷ to select [YES] or [NO], then
press @.
The measurement is OK.
Disconnect the calibration mic, then select
[YES]. The result is implemented.
The measurement is not OK.
Follnw tire message, then select [YES] to
retry.
While the Auto Calibration fimction works:
do not turn off the power.
do not press any button.
do not change the volume.
do not change the functkm.
do not change the disc.
do not insert or eject a disc.
do not connect the headphones to the unit or
surround amplifier.
do not disconnect the calibration mic.
• The measurement for [SUBWOOFER] is always
[YES] since the system does not perform subwoofer
calibration.
• You can check the distance between the listening
position and each speaker. See page 73.
Controllingthe TV with
the SuppliedRemote
You can contrnl the TV (Sony only) by using
following buttons. Use these buttons (other than
TV I/(J), THEATER, TV 1NPUT. and TV VOL
+/-) while pressing tire TV button.
• Depending on the TV, you may not be able tocontrol
your TV or to use some of the buttons.
By pressing You can
TV I/(_ Turn the TV on/off.
THEATER Enjoy oplimal image suited for
nlovies.
TV INPUT Switch the TV's input source
between the TV and other input
sources.
TV VOL +_ A_[just the TV vohune.
TV CH +_,i: Select the TV channeh
Number Select the TV channeh
buttons :I*,
ENTER,_
TOOLS" Displays the operation menu for
the current display.
RETURN" Return to the previous channel or
layer on the menu of the TV.
MENU ': Display the menu of the TV.
MUTING* Turn off the TV sotlnd
temporarily.
_./4V,I,/.,),,, @ ,i: Select the item on the menu.
" Use these buttons while pressing the TV button.
O
O
-{j
gl us