Filter
Top Products
Chapter 2 Playback and Recording
Chapter 2 Recording and Playback 33
EN
Recording Procedure
Note
When controlling this unit from an editing controller connected to the
REMOTE connector, set the REMOTE/LOCAL switch to REMOTE.
When not, set the switch to LOCAL.
1 After checking that the cassette’s safety switch is set to write enabled
position and the tape for slack, hold the cassette so that the tape
window is facing upward, then insert it into this unit as illustrated
below.
For details of the cassette’s safety switch, see page 4. For details of checking
the tape for slack, see page 5.
The cassette is automatically drawn into the unit and the tape is wound
round the head drum. The tape is stationary while the head drum
rotates.
2 Press the PLAY button on the player.
This starts the player’s playback operation.
3 Press and hold the REC button, and press the PLAY button.
This starts the recorder’s recording operation.