Filter
Top Products
Playback
Chapter 2 Playback and Recording
26
EN
Chapter 2 Playback and Recording
Displaying tape information
If you record on a tape using a Sony digital camcorder DSR-200/200P,
camcorder data (the shutter speed, program AE mode, white balance, iris
and gain) can be recorded on the tape. You can check these data during
playback on this VCR.
Press DATA CODE during playback.
Each time you press DATA CODE, the display changes as follows.
Notes
• When the information was not recorded, “- - -” appears instead.
• The camcorder data displayed on the monitor screen by this VCR are
partially different from those shown by the digital camcorder.
1998 / 12 / 25
12:59 AM LINE
AWB
60 MANUAL
F 1.6 0 dB
Data display off
Recording
date and time
Sony camcorder
settings
Shutter speed
Iris
White balance
Program AE mode
Gain