Filter
Top Products
DHC-AZ55D/AZ33D.GB.3-215-548-11(1)
113
GB
Additional Information
Continued
The disc title, CD-TEXT and DVD-TEXT
characters do not appear properly.
Use a disc that conforms to the
ISO 9660 Level 1, Level 2, or Joliet
(expansion).
e character code that can be
displayed by this system are numbers
and alphabet only. Other characters
appear as “*”.
ID3 tag information cannot be
displayed on this system.
The surround eect is dicult to hear
when you are playing a Dolby Digital
or MPEG audio sound track.
Make sure the sound eld is set
properly (page 88).
Check the speaker connection
(page 21).
Depending on the DVD VIDEO, the
output signal may not be the entire 5.1
channel. It may be monaural or stereo,
even if the sound track is recorded in
Dolby Digital or MPEG audio format.
The sound loses stereo eect when
you play back a DVD VIDEO, VIDEO
CD, AUDIO CD, MP3 audio track or
DivX video le.
Unplug the microphone or press
KARAOKE MODE
repeatedly until
“” disappears from the display.
Make sure the system is connected
properly.
USB device
“Over Current” appears.
A problem has been detected with the
level of electrical current from the
(USB) port
. Turn o the system and
remove the USB device from the
(USB) port
. Make sure there is no
problem with the USB device. If this
display pattern persists, contact your
nearest Sony dealer.
Are you using a supported USB
device?
If you connect an unsupported USB
device, the following problems may
occur. See “Playable USB devices”
(page 135) for the supported device
types.
e USB device is not recognized.
File or folder names are not
displayed on this system.
Playback is not possible.
e sound skips.
ere is noise.
A distorted sound is output.