Filter
Top Products
58
US
obstruction between the speakers and the
calibration mic.
2 Press C/c to select [YES], then press
.
[AUTO CALIBRATION] starts.
Be quiet during the measurement.
Note
• The environment of the room in which the
system is installed may affect measurements.
When the measurements differ considerably
from the status of the speaker installation,
perform the speaker settings manually by
following “Settings for the speakers” (page 60).
3 Press C/c to select [YES] or [NO], then
press .
4 Disconnect the calibration mic when
the measurement completes correctly.
Note
• The system outputs a loud test sound when [AUTO
CALIBRATION] starts. You cannot turn the volume
down. Give consideration to children and neighbors.
• The measurement for [SUBWOOFER] is always
[YES] and [SPEAKER SETUP] returns to the default
setting when you perform [AUTO CALIBRATION].
x[AUDIO DRC]
You can compress the dynamic range of the
sound track. [AUDIO DRC] is useful for
watching movies at low volume late at night.
[OFF]: No compression of dynamic range.
[STANDARD]: The system reproduces the
sound track with the kind of dynamic range that
the recording engineer intended.
[MAX]: The system compresses dynamic range
fully.
Note
•[AUDIO DRC] works only for Dolby Digital.
x[TRACK SELECTION]
You can give the sound track which contains the
highest number of channels priority when
multiple audio formats (PCM, DTS, Dolby
Digital, or MPEG audio) are recorded.
[OFF]
: Off.
[AUTO]: The system selects the sound track
automatically according to the priority.
Note
• When you set the item to [AUTO], the language may
change. The [TRACK SELECTION] setting has
higher priority than the [AUDIO] settings in
[LANGUAGE SETUP] (page 54). (Depending on
the disc, this function may not work.)
x[SCREEN SAVER]
You can reduce the
damage to the display device
(ghosting). Press any button (e.g.,
N
) to cancel
the screen saver.
[ON]
: The screen saver image appears if you do
not operate the system for about 15 minutes.
[OFF]: Off.
x[BACKGROUND]
You can select the background color or picture
on the TV screen.
Calibration mic
Other Settings
[SYSTEM SETUP]