Filter
Top Products
44
US
Enjoying Surround Sound
You can enjoy surround sound simply by selecting one of the system’s pre-programmed surround
settings.
1 Press SYSTEM MENU.
2 Press X/x to select “SUR.SETTING,” then press or c.
The selected item appears in the front panel display.
3 Press X/x to select “PRO LOGIC,” then press .
4 Press SYSTEM MENU.
Note
• When TV program sound is monaural, sound is output only from the center speaker.
1 Press SYSTEM MENU.
2 Press X/x to select “SUR.SETTING,” then press or c.
The selected item appears in the front panel display.
3 Press X/x to select the surround setting you want, then press .
See the table below for surround setting descriptions.
4 Press SYSTEM MENU.
About speaker output
The table below describes the options when you connect all the speakers to the unit and you set
[SPEAKER FORMATION] to [STANDARD] (page 57).
Sound Effect
Enjoying TV sound with the 5.1 channel surround sound effect
Selecting surround settings based on your listening preference
Sound from Surround setting Effect
“A.F.D. MULTI”
(AUTO FORMAT
DIRECT MULTI)
• 2 channel source: The system outputs 2 channel sound from
the front and surround speakers by assigning the 2 channel
sound to the surround left and right channels.
• Multi-channel source: The system outputs sound from the
speakers depending on the number of channels of the
source.