Filter
Top Products
80
US
ZONE 2 VIDEO OUT (RJ-45 jack) is used only for custom installation by a qualified person.
ZONE 2 VIDEO OUT (RJ-45 jack) is a jack that sends a source video signal to the component
video input for zone 2. For details, consult your dealer.
Attention
Do not use this jack for an Ethernet LAN connection. Doing so may cause a malfunction.
ZONE 2 VIDEO OUT (RJ-45 jack) connection
The RJ-45 pinouts use the T568B standard. Refer to the illustration below.
Note
CAV-CVB1 (Component Video Balun) must be used. Other types will cause trouble and may void your
warranty.
CAT5 cable
Be sure to verify the CAT5 wiring connection is correct. Use Category 5e or Category 6 cable.
Making a zone 2 configuration using ZONE 2 VIDEO OUT (RJ-45 jack)
Component Video Balun
CAV-CVB1
ZONE 2 VIDEO OUT (RJ-45 jack) CAT5 cable Component video
cable
TV
monitor
Z
one
2
CAT5 cable
RJ-45 connector
RJ-45 connector
BLUE/Pb (R)
Pinout
BLUE/Pb (T)
GREEN/Y (R)
GND
+11V
GREEN/Y (T)
RED/Pr (R)
RED/Pr (T)
1
Pin No.
2
3
4
5
6
7
8
BLUE/Pb (R)
BLUE/Pb (T)
GREEN/Y (R)
GND
+11V
GREEN/Y (T)
RED/Pr (R)
RED/Pr (T)
1
2
3
4
5
6
7
8
White/Orange
Wire color
Orange
White/Green
Blue
White/Blue
Green
White/Brown
Brown
White/Orange
Orange
White/Green
Blue
White/Blue
Green
White/Brown
Brown