Filter
Top Products
141
US
Additional Information
Surround back
• Some discs have no Dolby Digital
Surround EX information.
• If the speaker pattern is set so that there are
no surround back speakers, the input
signals to the SUR BACK jacks is invalid,
because the receiver cannot down-mix the
surround back channels.
Subwoofer
• Check that the subwoofer is connected
correctly and securely.
• Make sure you have turned on your
subwoofer.
There is no sound from a specific
equipment.
• Check that the equipment is connected
correctly to the audio input jacks for that
equipment.
• Check that the cord(s) used for the
connection is (are) fully inserted into the
jacks on both the receiver and the
equipment.
• Set the INPUT MODE to “AUTO”
(page 88).
HDMI input
• When “2ch Analog Direct” is being used,
the sound is not output. Use other sound
field (page 71).
• Check the HDMI connection (page 30, 32,
34, 37).
• Check that you use an HDMI cable that
have an HDMI logo authorized by HDMI
Licensing LLC.
• Depending on the playback equipment,
equipment may need to be set up. Refer to
the operating instructions supplied with
the each equipment.
• Be sure to use a connecting cable for the
HDMI jack corresponding to High Speed
HDMI cable when you view images or
listen to sound during a 1080p, Deep
Color, or 3D transmission.
• Sound may not be output from the receiver
while the GUI appears on the TV screen.
Press HOME to turn the GUI off.
• Audio signals (format, sampling
frequency, bit length, etc.) transmitted
from an HDMI jack may be suppressed by
the connected equipment. Check the setup
of the connected equipment if an image is
poor or the sound does not come out of an
equipment connected via the HDMI cable.
• When the connected equipment is not
compatible with copyright protection
technology (HDCP), the image and/or the
sound from the HDMI OUT jack may be
distorted or may not be output. In this case,
check the specification of the connected
equipment.
• Set the image resolution of the player to
more than 720p/1080i to enjoy High
Bitrate Audio (DTS-HD Master Audio,
Dolby TrueHD).
• The image resolution of player may need
certain settings be made before you can
enjoy DSD and multi-channel Linear
PCM. Refer to the operating instructions
of the player.
• Make sure the TV is compatible with the
System Audio Control function.
• If the TV does not have System Audio
Control function, set the “Audio Out”
settings in the HDMI Settings menu to
– “TV+AMP” if you want to listen to the
sound from the TV speaker and
receiver.
– “AMP” if you want to listen to the
sound from the receiver. When you
connect the receiver to a video
equipment (projector, etc.), sound may
not be output from the receiver. In this
case, select “AMP.”
• You cannot listen to the sound of an
equipment connected to the receiver while
a TV is selected as the input on the
receiver.
– Be sure to change the input of the
receiver to HDMI when you want to
watch a program on an equipment
connected to the receiver.
– Change the TV channel when you want
to watch a TV broadcast.
continued