Filter
Top Products
118
US
System Settings
You can customize the settings of the receiver.
Lets you select the language for the messages
on the screen.
x English
x Español
x Français
x Deutsch
Lets you turn the function that switches the
main zone to standby mode automatically if
you do not operate the receiver for a specific
period of time or when there is no signal input
to the receiver on or off.
x Off
Does not switch to standby mode.
x On
Switches to standby mode after approximately
30 minutes.
Note
• This function does not work in the following cases.
– “MULTI IN,” “FM/AM,” or “SIRIUS” is
selected.
– When you play back via a USB device, an
iPhone/iPod, a home network, or Internet video.
Lets you lock the settings of the receiver.
x On
You can only turn this function on using the
setting menu. When you turn this function off,
perform the following procedure.
1 Press ?/1 to turn off the
receiver.
2 While holding down MUSIC and
SPEAKERS (A/B/A+B/OFF),
press ?/1 to turn on the
receiver.
Let you turn the control mode for maintenance
and service on or off.
x Off
x On
Lets you set whether or not to inform you of
newer software version information on the TV
screen.
x On
x Off
To update the receiver
See “Network Update” (page 119) to update
the software of the receiver.
Note
• In the following cases, a message appears on the
TV screen and the update of the receiver is not
performed.
– When all versions are the latest one.
Language
Auto Standby
Settings Lock
RS232C Control
Software Update Notification
?/1 MUSIC
SPEAKERS (A/B/A+B/OFF)