Filter
Top Products
102
US
To set a compensation type for the
speakers
You can select the compensation type to be
used for the speakers for each Position.
1 Select the “Position” for which you want
to set the speaker compensation type,
then press .
2 Select the “Calibration Type” you want,
then press .
•Full Flat
Makes the measurement of frequency
from each speaker flat.
• Engineer
Sets the frequency to match that of the
Sony listening room standard.
• Front Reference
Adjusts the characteristics of all the
speakers to match the characteristics of
the front speakers.
• User Reference
Sets the frequency to one that you
customized using “User Reference Edit.”
•Off
Sets the Auto Calibration EQ to off.
Note
You cannot set the “Calibration Type” for “Position”
for which the measurement results have not been
registered.
To set the reference value when
you select “Front Reference” for
the “Calibration Type”
1 Select the “Front Reference Type” in
the Calibration Type menu, then press
.
2 Select the parameter you want, then
press .
•L/R
Sets the data of the left and right channels
to the reference value.
•L
Sets the data of the left channel to the
reference value.
•R
Sets the data of the right channel to the
reference value.
Notes
• This function works only when you select “Front
Reference” for the “Calibration Type” (page 101).
• Perform “Auto Calibration” after you set “Front
Reference Type.”
To customize the frequency for the
“User Reference”
You can customize the frequency for the “User
Reference” in the “Calibration Type” based on
the “Full Flat” compensation type.
1 Select the “User Reference Edit” in the
Calibration Type menu, then press .
2 Adjust the frequency.
To set the pair match mode for the
Auto Calibration EQ pattern
1 Select the “Position” for which you want
to set the pair match mode, then press
.
2 Select “Speaker Pair Match,” then
press .
•All
Calibrates all the speakers using the pair
match processing of the left and right
channels for each pair of speakers.
•Sur
Calibrates the surround speakers and the
surround back speakers using the pair
match processing or the left and right
channels for each pair of speakers.
•Off
Calibrates each speaker individually.
Notes
• This function does not work when “Auto
Calibration” is not performed.
• You cannot set “SP Pair Matching” to “ALL” when
you select “Front Reference” for the “Calibration
Type” (page 102).
To name the Position
1 Select the “Position” for which you want
to name, then press .
2 Select “Name In,” then press .
The soft keyboard appears on the screen.