Sony CMT-J3MD Stereo System User Manual


 
72
C41/Cannot Copy
The sound source is a copy of a commercially
available music software, or you tried to record
a CD-R (Recordable CD).
cThe Serial Copy Management System
prevents making a digital copy (see page 68).
You cannot record a CD-R.
Messages
One of the following messages may appear or
flash in the display during operation.
MD
Auto Cut
The MD deck is pausing the recording because
silence continued for 30 seconds or more during
digital recording.
Blank Disc
The inserted recordable MD is new, or all
tracks on the MD have been erased.
Cannot Edit
A pre-mastered MD is in the deck.
You tried to edit in Programme or Shuffle
Play mode.
Cannot REC
A pre-mastered MD is in the deck.
The function is switched to MD.
Cannot SYNC!
There is no disc in the MD deck, or the MD is
protected against erasure.
There is no time remaining on the MD.
Complete !!
The editing operation of MDs is completed.
Disc Full!!
There is no time remaining on the MD.
Eject
The MD deck is ejecting the MD.
Impossible
You tried to make an impossible editing
operation.
You cannot combine the tracks due to the
system limitations of MDs.
Self-diagnosis display
This system has a Self-diagnosis display function
to let you know if there is a system malfunction.
The display shows a code made up of three letters
and a message alternately to show you the
problem. To solve the problem refer to the
following list. If any problem persists, consult
your nearest Sony dealer.
C11/Protected
The MD is protected against erasure.
cRemove the MD and slide the tab to close the
slot (page 32).
C12/Cannot Copy
You tried to record a CD or MD with a format
that the system does not support, such as a CD-
ROM.
cRemove the disc and turn off the system once,
then turn it on again.
C13/REC Error
Recording could not be performed properly.
cMove the system to a stable place, and start
recording over from the beginning.
The MD is dirty or scratched, or the MD does
not meet the standards.
cReplace the MD and start recording over from
the beginning.
C13/Read Error
The MD deck cannot read the disc information
properly.
cRemove the MD once, then insert it again.
C14/Toc Error
The MD deck cannot read the disc information
properly.
cReplace the MD.
cErase all the recorded contents of the MD
using the All Erase function on page 46.