Filter
Top Products
34
Recording on an MD
manually
— Manual Recording
With manual recording, you can record just the
portions you like from a CD, or start recording
from the middle of the tape. You can also record a
radio programme.
If you use a partially recorded MD, recording
starts after the recorded tracks.
3
2
4
HS HS
A
h
H
S
1 Insert a recordable MD.
2 Press FUNCTION repeatedly to select
the desired source (e. g., TUNER) to
record.
• CD: Recording from the CD
• TAPE: Recording from the tape
• TUNER: Recording from the radio
3 Press z MD.
The MD deck stands by for recording.
4 Press MD HS.
Recording starts.
Labelling titles during recording
If “CD-TEXT” lights up or flashes during
recording, you can record the CD TEXT
information onto the MD as follows:
• Automatically during recording
If you record on an unrecorded or completely
erased (see page 46) MD when “CD-TEXT” is
lit, the CD TEXT information is automatically
recorded.
• Manually during recording
When “CD-TEXT” flashes, press NAME EDIT
on the remote, and then press ENTER/YES on
the remote to record the title of the current
track.
Notes
• Depending on the disc, the CD TEXT information
may not be recorded automatically.
• When you record on an MD and a tape at the same
time, the CD TEXT information is not recorded.
Record this information after the recording is
completed (see page 43).
Recording your favourite CD
tracks on an MD (continued)