Filter
Top Products
38
Marking track numbers at a
specific point during
recording
— Track Mark
You can mark track numbers at any time during
recording, regardless of the type of sound source.
HS HS
A
h
H
S
z MD
, Press z MD during recording at the
point you want to add a track mark.
The tracks following the added one are
renumbered.
Marking track numbers
(continued)
5 Press . or > repeatedly until
“T.Mark Off” appears, then press
ENTER/YES.
6 Press . or > repeatedly until
“T.Mark LSync” appears, then press
ENTER/YES.
“LEVEL-SYNC” lights up.
7 Press MENU/NO.
8 Press MD HS.
Recording starts.
To stop recording
Press s.
To cancel automatic track
marking
1 Press MENU/NO on the remote during
recording pause.
2 Press . or > on the remote repeatedly
until “Setup ?” appears, then press ENTER/
YES on the remote.
3 Press . or > repeatedly until “T.Mark
LSync” appears, then press ENTER/YES.
4 Press . or > repeatedly until “T.Mark
Off” appears, then press ENTER/YES.
5 Press MENU/NO.
“LEVEL-SYNC” disappears.
When “LEVEL-SYNC” is off, a track number is
marked only at the beginning of each recording.