Filter
Top Products
24
To check the programme order
Press . or > repeatedly during Programme
Play.
To Do this
Cancel
Programme
Play
Press x, then press PLAY MODE
repeatedly until “PGM” and
“SHUFFLE” disappear.
Add a track to
the programme
(in stop mode)
Do steps 3 and 4.
Erase the entire
programme
Press x, when Programme Play is
in stop mode.
To select the desired track using
the number buttons
Press number buttons instead of performing steps
3 to 5.
To enter track numbers 10 or over, press >10 and
the track number. To enter 0, use the 10/0 button.
Tips
• The programme you made remains after
Programme Play finishes. To play the same
programme again, press H.
• “Step Full” appears when you try to programme 26
or more tracks (steps).
• “--m--s” appears when the total CD programme
time exceeds 100 minutes, or when you select a CD
track whose number is 21 or over.
Programming CD tracks
(continued)
Last programmed
track number
3 Press . or > repeatedly until the
desired track appears in the display.
4 Press ENTER/YES.
The track is programmed.
“Step” appears, followed by the number of
the track in the programmed sequence. The
number of the last programmed track
appears, followed by the total playing time of
the programme. If you made a mistake, you
can clear the last programmed track from the
programme by pressing CLEAR.
Total playing time
5 To programme additional tracks, repeat
steps 3 and 4.
6 Press H.
All the tracks play in the order you selected.
Last programmed
track number
Total playing time
of the programme
Selected track
number
Total playing time
To check the total number of
programmed tracks
Press DISPLAY in stop mode. The total number
of programmed steps appears, followed by the last
programmed track number and the total playing
time of the programme.