Filter
Top Products
10
Basic Operations
Playing a CD
To turn on the system, press ?/1 (power).
HS
A
A
M
ml
L
h
H
HS
`/1
2
1
VOLUME
s
lm/ML
2 Press CD HS.
The disc tray closes and play starts.
The indicator on the CD HS button lights
green.
Track number Playing time
To Do this
Stop play Press s.
Pause Press CD HS. The indicator on
the CD HS button lights orange.
Press again to resume play.
Select a track Press lm or ML
repeatedly.
Find a point in a
track
Keep pressing lm or
ML during play and release it
at the desired point. “—OVER—”
appears at the end of the CD.
Remove the CD Press CD A.
Adjust the
volume
Turn VOLUME.
Tips
• If there is no CD in the player, “CD No Disc”
appears in the display.
• Pressing CD HS when the system is off
automatically turns on the system and starts CD
play if there is a CD on the disc tray (One Touch
Play).
• You can switch from another source to the CD
player and start playing a CD just by pressing CD
HS (Automatic Source Selection).
• You can start playing from the desired track in
step 2.
1 Press lm or ML repeatedly until the
desired track appears.
2 Press CD HS.
Or, press the number buttons on the remote.
The playback automatically starts. To enter track
numbers 10 or over, press >10 and the track
number. To enter 0, use the 10/0 button.
?/1 (power)
1 Press CD A and place a CD on the disc
tray.
A
HS HS
h
H
S
With the label
side up. When
you play a CD
single (8 cm
CD), place it on
the inner circle
of the tray.
To close the disc tray, press CD A again.