Filter
Top Products
44
2 Press NAME EDIT.
The cursor starts flashing.
Cursor
3 Press CHARACTER to select the
desired type of character.
Each time you press the button, the display
changes as follows:
A (Upper cases) t a (Lower cases) t 0
(Number) t ! (Symbols) t A (Upper
cases) t
…
4 Press . or > repeatedly to select
the desired character.
To enter a blank space
Press CURSORt without pressing . or
>. You cannot enter a space as the first
character.
To enter a symbol
You can use the following 24 symbols.
! ” # $ % & ’ ( ) + , – . / : ; < = > ? @ _ `
5 Press CURSORt.
The character you selected in step 4 stops
flashing and the cursor shifts to the right.
Cursor
6 Repeat steps 3 to 5 to complete the
entire title.
If you made a mistake
Press CURSORT or t until the character
you want to change flashes, then repeat steps
3 to 5.
To erase a character
Press CLEAR while the character is flashing.
You cannot insert characters.
7 Press ENTER/YES to complete the
labelling procedure.
The titles you labelled appear sequentially,
and then the original display appears.
To cancel labelling
Press MENU/NO.
Notes
• You can label a track title during play. The
playback repeats until you finish labelling.
• If the MD is record protected, “C11” and
“Protected” appear alternately and the MD cannot
be edited. Remove the MD, then slide the record
protection tab to the closed position (see page 32).
Copying a disc or track title
You can copy a labelled disc or track title to use it
as a title of another track or the disc title within a
disc.
1 Press MENU/NO in stop mode.
2 Press . or > repeatedly until “Name ?”
appears, then press ENTER/YES.
3 Press . or > repeatedly until “Name
Copy ?” appears, then press ENTER/YES.
4 Press . or > repeatedly to select “Disc”
(when copying the disc title) or the track
number with the title you want to copy, then
press ENTER/YES.
When “No Name” appears
The disc or track has not been labelled.
5 Press . or > repeatedly to select the copy
destination track number or “Disc” (when
copying as the disc title), then press ENTER/
YES.
When “Overwrite ??” appears
The copy destination already has a disc or track
title. To continue and copy the title, press
ENTER/YES.
Labelling an MD (continued)