Filter
Top Products
The CD Player
27
Erasing a disc title
1 Press MENU/NO in stop mode.
2 Press . or > repeatedly until “Name
Erase ?” appears, then press ENTER/YES.
The disc title appears scrolling in the display.
“No Name” appears if no disc title is labelled.
3 Press ENTER/YES again.
“Complete !!” appears and the disc title is
erased.
To cancel erasing
Press MENU/NO during steps 1 and 2.
Erasing all disc titles stored in
the system memory
1 Press MENU/NO in stop mode.
2 Press . or > repeatedly until “All
Erase ?” appears, then press ENTER/YES.
“All Erase ??” appears.
3 Press ENTER/YES again to erase disc titles.
“Complete !!” appears and all disc titles are
erased.
To cancel erasing
Press MENU/NO during steps 1 and 2.
Note
To ensure that disc titles are not erased from memory,
have the system connected to mains power at least
once a month.
6 Repeat steps 3 to 5 to complete the
entire title.
If you made a mistake
Press CURSORT or t until the character
you want to change flashes, then repeat steps
3 to 5.
To erase a character
Press CLEAR while the character is flashing.
You cannot insert characters.
7 Press ENTER/YES to complete the
labelling procedure.
The disc title is stored in the system memory
and then the original display appears.
To cancel labelling
Press MENU/NO.
Checking the disc titles
1 Press MENU/NO in stop mode.
2 Press . or > repeatedly until “Name
Check ?” appears, then press ENTER/YES.
3 Press . or > repeatedly to select the disc
titles stored in the system memory between 001
and 050.
To check the current disc title
Press SCROLL in stop mode.