Filter
Top Products
35
MD — Editing
4 Press . or > on the remote
repeatedly until “S.F Edit ?” appears in
the display, then press ENTER/YES on
the remote.
5 Press . or > on the remote
repeatedly until “Fade In?” or “Fade
Out?” appears in the display, then
press ENTER/YES on the remote.
6 Press . or > on the remote
repeatedly to select the track number
you want to Fade-in or Fade-out, then
press ENTER/YES on the remote.
“Time 5.0s” appears.
7 While monitoring the sound, press .
or > on the remote repeatedly to
change the Fade-in, or Fade-out
recording time.
The system plays the portion that will be
recorded over using the Fade-in or Fade-out
Recording. You can set the time at any
value between 1.0 second and 15.0 seconds
in 0.1-second increments. You cannot set
the time longer than the track.
8 Press ENTER/YES on the remote.
“S.F Edit OK?” appears.
9 Press ENTER/YES on the remote.
“S.F Edit: **%” appears while the track is
being recorded. When the recording
finishes, “Complete !” appears for a few
seconds.
To cancel the operation
Press MENU/NO on the remote during step 2
through 8. After recording starts in step 9, you
cannot interrupt the operation.
Notes
• You cannot use the S.F Edit Function for tracks
recorded in MDLP mode.
• You cannot undo the S.F Edit Function even if you
use the Undo Function.
• Do not disconnect the power cord or move the
system while recording is in progress. This may
damage the recording data, preventing recording
from being performed properly.
• Do not use an MD that is damaged or dirty, this
may prevent data from being recorded properly.
• Repeatedly changing the recording level results in
poor sound quality.
• The recording level will not return to the exact
original level once the recording level has been
changed even if it is returned to the original level.
• While the timer is activated, you cannot change the
recording level.
• You cannot return to the original condition after
changing the recording level.