Filter
Top Products
12
5 To program additional tracks, repeat
steps 3 and 4.
6 Press CD u (or N on the remote).
To
Check the program
order
Check the total
number of programed
tracks
Cancel Program Play
Add a track to the end
of the program
Erase the last
programed track
Select the desired
track using the
number buttons on
the remote
Tips
• The program you made remains after Program Play
finishes. To play the program again, switch the
function to CD, and then press CD u (or N on
the remote).
• “--.--” appears when the total CD program time
exceeds 100 minutes, or when you select a CD track
whose number is 21 or over.
Do this
Press CD . or >
repeatedly during Program
Play.
Press DISPLAY on the
remote in stop mode. The
total number of programed
steps appears, and then the
last programed track number
and the total playing time of
the program.
Press CD x, then press
PLAY MODE/DIRECTION
(or PLAY MODE on the
remote) repeatedly until
“PGM” and “SHUFFLE”
disappear from the display.
Do steps 3 and 4 with
Program Play stopped.
Press CLEAR on the remote
in stop mode. Each time you
press the button, the last
programed track is erased.
Press number buttons instead
of performing steps 3 to 5.
To use number buttons, see
page 11.
Selected track
number
Programing the CD tracks
— Program Play
You can make a program of up to 25 tracks on
a CD in any order that you want.
1 Press FUNCTION repeatedly until “CD”
appears in the display.
You can switch the function to CD by
pressing the CD button on the remote.
2 Press PLAY MODE/DIRECTION (or
PLAY MODE on the remote) in stop
mode repeatedly until “PGM” appears
in the display.
3 Press CD . or > repeatedly until
the desired track number appears in
the display.
4 Press ENTER/YES on the remote.
The track is programed.
“Step” appears, followed by the number of
the track in the programed sequence. Then
the number of the last programed track
appears, followed by the total playing time
of the program. If you have made a mistake,
you can clear the last programed track from
the program by pressing CLEAR on the
remote.
Last programed
track number
Total playing time
Playing time of the
selected track