Filter
Top Products
31
MD — Editing
Moving recorded tracks
— Move Function
You can use this function to change the order
of any track on the disc. When you move
tracks, the tracks are automatically
renumbered.
Example: Moving track 3 to position 2.
123
1
23
4
4
AB C D
CBDA
1 Press MD on the remote to switch the
function to MD.
2 Press MENU/NO on the remote to
display “Edit Menu.”
3 Press . or > on the remote
repeatedly until “Move ?” appears, then
press ENTER/YES on the remote.
4 Press . or > on the remote
repeatedly until the desired track
number to move appears, then press
ENTER/YES on the remote.
5 Press . or > on the remote
repeatedly until the new track position
appears.
6 Press ENTER/YES on the remote.
“Complete !” appears.
Track
number
Original
tracks
After
MOVE
Dividing recorded tracks
— Divide Function
You can use this function to mark track
numbers after recording. The total number of
tracks increases by one and all the tracks
following the divided ones are renumbered.
Example: Dividing track 2 into two tracks.
12 3
123 4
A
AB C D
CBD
1 Press MD on the remote to switch the
function to MD.
2 Press MENU/NO on the remote to
display “Edit Menu.”
3 Press . or > on the remote
repeatedly until “Divide ?” appears,
then press ENTER/YES on the remote.
4 Press . or > on the remote
repeatedly until the desired track
number to divide appears. Then, while
listening to rehearsal play, press
ENTER/YES on the remote at the point
where you want to divide the track.
“—Rehearsal—” appears and the portion to
be divided is played repeatedly.
continued
Track
number
Original
tracks
After
DIVIDE
Divide track 2 into
track B and C
Original track
number
New track position