Filter
Top Products
32
Combining recorded
tracks
— Combine Function
You can use this function to combine 2 tracks
into a single track. The total number of tracks
decreases by one and all tracks following the
combined ones are renumbered.
You can also use this function to erase
unnecessary track numbers.
Example: Combining track 3 to track 1.
12
12
43
3
A
ACBD
DCB
Example: Combining track 1 to track 4.
12
12
43
3
4
5
A
BC D A
DCB
1 Press MD on the remote to switch the
function to MD.
2 Press MENU/NO on the remote to
display “Edit Menu.”
3 Press . or > on the remote
repeatedly until “Combine ?” appears,
then press ENTER/YES on the remote.
Track
number
Original
tracks
After
COMBINE
Original
tracks
After
COMBINE
5 While monitoring the sound, press .
or > on the remote repeatedly to
adjust the point to be divided.
You can shift the point by 1/86 second
(1 frame) intervals*.
To shift the point by second or minute
intervals, press m or M on the remote
so that second or minute flashes, then press
. or > on the remote.
* You can shift the starting point by 2-frame
intervals (in Monaural mode and LP2 Stereo
mode) or by 4-frame intervals (in LP4 Stereo
mode).
6 Press ENTER/YES on the remote.
“Complete !” appears.
Note
If you divide a labeled track (see page 26) into two
tracks, only the first track retains the track title.
Example:
12
12
43
3
45
Andante
Andante
Adagio
Adagio
Allegro
Allegro
The new track is not labeled
Dividing recorded tracks (continued)