Filter
Top Products
Connection
(6)
@
To use the AVC20 on the two rear channels and use the
two front channels with an added amplifier, change the
U-shaped short pins as shown in the diagram.
@
Connect the FRONT-PRE OUT terminals to the input
terminals of the other amplifier using pin plug cables.
@
Use the outside speaker terminals for the Rear speakers.
@
When this
is
done, the AVC20 volume control can be
operated, but the volume of the other amplifier must
be
increased to a suitable level.
-SPEAKER
SYSTEMS-
Remove both the FRONT and
REAR short pins, and as shown
in the diagram, connect the
FRONT
MAIN IN and REAR
PRE OUT terminals.
Right Channel Left Channel
Rear Speakers
I I
Other Amplifier
El
Right Channel Left Channel
Front Speakers