Filter
Top Products
4.
Use of the Preset Volume Buttons
It
is possible to place in the memory three different volume
adjustment settings. When the optimal adjustment is reach-
ed
as
shown in number
3
above, press the STORE button.
(There
is no need to keep
it
pressed in.) When this
is
done, the PRESET VOLUME indicators
(
,
I,
and
(
)on the
AVC20
will flash. While the indicators are
flashing (approximately
5
seconds), press one of the PRE-
SET VOLUME buttons on the wireless remote control unit.
The volume adjustment
is
now stored in the memory.
Simply press the desired button to obtain the preset volume
adjustment later on.
A
volume adjustment setting will remain stored in
the memory for approximately one week after the
power
is
turned off.
To change a preset volume adjustment setting,
adjust the volume
as
desired, and follow the same
procedure
as
in step
4
above. The previous setting
in the memory will be erased.
The preset volume adjustment setting can only be
obtained by using the remote control unit.
A
5.
Use of Full Mute Button
Press this button when you wish to turn off the volume
momentarily, such as when
a
visitor arrives unexpectedly
or when the telephone rings. The FULL MUTE indicator
Won the
AVC20
will flash. Press the button once
again to return to the previous volume.