Filter
Top Products
1.
SURROUND-SOUND EFFECT SELECTION
The
AVC20 provides
a
choice of
3
surround effects,
depending upon the program or software being viewed.
For programs for which the surround effect
is
not nece-
ssary, such as news broadcasts, press the BYPASS but-
ton. Sound can be heard from the front speakers only.
-1-
Press this button for movies, etc.
1-1-
Press this button for sports programs etc.
m
JCONCERTI-
Press this button for concerts or old movies.
*Refer to page
3
for more detailed information.
2.
Use
of
Volume Button
First press the RESET button (there
is
no need to keep it
pressed down), then press the side of the VOLUME
button. When held down, the volume gradually increases. If
the volume becomes too loud, press the
mside. When the
desired volume is reached, release the button.
3.
Adjusting Volume Balance
From the listening position, adjust the volume balance,
using the controls described below, to feel engulfed from all
sides while maintaining a good front stage orientation.
Readjust the overall volume.
I=].
.
.
.
.
.
.Causes the surround image to slowly
travel towards the front.
-1
.
.
. . .
.
.Causes the surround image to slowly
travel towards the rear.
.
.
.
.
. .
.Causes the surround image to slowly
travel towards the left.
. .
. . .
.
.Causes the surround image to slowly
travel towards the right.