Filter
Top Products
61
ENGLISH
• The ROOM 2 function allows enjoying one source in the main room while playing another in a different room at the
same time.
• ROOM 2 : To turn on or off the ROOM 2 function.
• INPUT : To select the desired ROOM 2 source.
• VOLUME : To adjust the volume on the power amplifier assigned
to "BACK ROOM 2" or "ROOM 2".
Notes:
• The analog signals from the EXTERNAL INs and the digital
signals cannot be output to the different room, meaning no
playback in a different room.
• Only the (composite) video signals can be output to the different
room.
Note:
• The VOLUME setting is invalid when the AMP ASSIGN
is assigned to "BI-AMP" or "SURR BACK".
(For details, refer to "When selecting the AMP ASSIGN"
on page 41.)
SETTING THE MULTI ROOM SETUP
• You can adjust the volume on the power amplifier
assigned to "BACK ROOM 2" or "ROOM 2" when
the ROOM 2 speaker terminals are connected to the
speakers in a different room.(For details, refer to "When
selecting the AMP ASSIGN" on page 41.)
When selecting the INPUT
• You can select the desired among MAIN source, TUNER,
CD, F.AUX, TAPE, BT, VIDEO 1 ~ VIDEO 3 as a ROOM 2
source.
Note:
• When the EXTERNAL IN is selected as a main input, if the
MAIN source is selected as a ROOM 2 input, no audio
signal can be heard in the different room (ROOM 2).
When selecting the VOLUME
OFF : To turn off the ROOM 2 function.
ON : To turn it on.
Notes:
• When the ROOM 2 is set to OFF, the INPUT and the
VOLUME cannot be selected.
• When you do not use the ROOM 2 function, set the
ROOM 2 to OFF to save electricity.
When selecting the ROOM 2
1. Press the CURSOR UP()/DOWN() buttons
to select the desired item.
2. Press the CURSOR LEFT()/RIGHT()
buttons to set the selected item as desired.
RD-7503(A) 2008.11.4 1:45 PM 페이지 61